[columns] [span6]
[/span6][span6]
[/span6][/columns]
[columns] [span3]
Dolby Atmos Playback
Plays up to 64 audio channels for an unmatched audience experience.
[/span3][span3]
Sophisticated EQ Processing
Optimizes playback for all content types, even for acoustically challenging environments.
[/span3][span3]
Flexible Configurations
Provides all the common I/O interfaces for the modern digital cinema.
[/span3][span3]
Automated Calibration
Ensures consistent, high-quality playback for each movie.
[/span3][/columns]
[hr]
[columns] [span8]
Give Your Audiences the Definitive Cinema Experience
The Dolby® Atmos™ Cinema Processor CP850 brings Dolby Atmos audio playback capabilities to your digital cinema. It enables theatres to fulfill the Dolby Atmos promise of a more natural and enveloping sound experience, one that best matches the artistic intent of the filmmakers.
[/span8][span4]
DOWNLOADS
[/span4][/columns]
[hr]
Versatile Audio Processing Plus Comprehensive Tech Support
The Dolby Atmos Cinema Processor CP850 offers a wide range of powerful capabilities to meet the audio needs of your digital cinema.
Technical Features
Dolby Surround 7.1 and 5.1 playback
Dolby codec support for alternative content (Dolby Digital Plus™, Dolby TrueHD, and Dolby E upmixing of non-DCP content)
16 channels of DCI PCM audio input
Support for 64 speaker feeds, configurable between 16 analog outputs and a Dolby Atmos Connect (DAC) output
Flexible I/O for a wide variety of content sources (16-channel AES, S/PDIF, optical, stereo analog, public announcement microphone)
Dolby Show Manager integration and web APIs to easily integrate with TMS and NOC systems
Simplified installation, maintenance, and day-to-day operation of cinema sound systems for exhibitors
Sophisticated EQ processing to improve cinema audio playback
Optimum Performance in Any Theatre
The CP850 optimizes playback of Dolby Atmos soundtracks in every cinema regardless of the number of channels available in the sound system. It also renders a Dolby Atmos soundtrack to match the content creators’ original intent as accurately as possible in every room. Its automated calibration tools simplify installation, easily correct problems that might arise, and ensure consistently high-quality playback over time.
Dolby Commissioning Service
Each CP850 includes the Dolby Commissioning Service, a complimentary speaker configuration design review and initial room equalization. Our Content Services consultants will review your design drawings and equipment selection to ensure that your theatre delivers the highest-quality experience possible.
Dolby Atmos Interface DAC3201
The Dolby Atmos Interface DAC3201 allows you to use legacy amplifiers in Dolby Atmos installations. The DAC3201 employs Dolby Atmos Connect, an audio-over-Ethernet protocol, to receive the Dolby Atmos stream from the Dolby Atmos Cinema Processor CP850. It then converts the stream to analog audio for connection to amplifiers. Each DAC3201 supports up to 32 analog outputs. A CP850 together with a single DAC3201 can support up to 48 output channels. Installations with more than 48 output channels will need two DAC3201 units.
[hr]
Rear Panel Connections
| Connector | Description |
| 1 x DB25 | 8 × AES (16-channel) input |
| 2 x BNC | Two AES-3id inputs |
| 1 x Toslink™ | One optical digital audio input |
| 1 x RCA | S/PDIF input |
| 2 x HDMI® | Two HDMI inputs that can be routed to the HDMI output |
| 1 x HDMI® | One HDMI pass-through output |
| RCA stereo | Non-sync input |
| 2 x XLR | Two microphone inputs for alignment and PA |
| 1 x GigE | Command interface for theatre network and web UI traffic |
| 2 x GigE | Dolby Atmos Connect interface |
| 1 x DB9 | Standard 9-pin serial port |
| 2 x DB25 | 16-channel electronically balanced analog outputs |
| 2 x RCA | HI and VI-N (Hearing Impaired and Visually Impaired Narrative) outputs |
| 1 x DB25 | Contact closure automation; eight assignable macros, mute, and a three-wire volume control |
| 1 x IEC 60320 | Power cable connector |
| 1 x RCA | Booth monitor output |
| 1 x BNC | DCI channels 13 and 14 pass-through for ancillary theatre system syncing |
[hr]